Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Brian Crower Stage 2 Normally Aspirated Camshafts
Part #: BC0032
$667.14
$620.44
For pair
For pair
Free Shipping! *to continental U.S. only
Fits On:
Honda H22
Description:
Adv. Dur.:
312°/310°
220°/220°
216°/218°
Dur @ .050:
255°/248°
200°/198°
198°/196°
Lift (in):
.470"/.469"
.325"/.308"
.280"/.264"
Lift (mm):
11.94/11.91
8.25/7.82
7.11/6.70
Kit #: BC0030 or BC0030S
Hot street/strip or road race specification. Use with CAI, H, E, ECU, A/F mods. Excellent street manners. Requires kit BC0030.
The Honda H engine was Honda's high-performance "big block" engine family from the 1990s and early 2000s. It is largely derived from the Honda F engine and shares many design features. It was replaced by the Honda K engine. The primary applications of the H engine series were the fourth- and fifth-generation Honda Prelude, and the fifth- and sixth-generation Honda Accord. It has also enjoyed some success as a racing engine, forming the basis of Honda's Touring car racing engines for many years, and being installed in lightweight chassis (such as the Honda CRX) for use in drag racing. The H22A debuted in 1993 for use in the Honda Prelude VTEC as the H22A1. Versions of the H22A would be the Prelude's signature high-performance engine worldwide until the end of Prelude production in 2001. It was also used in the 1994-1997 Honda Accord SiR and 1998-2002 Honda Accord Euro-R in Japan.
Rocker Ratio: 1.55:1 mid, 1.5:1 sec, 1.45:1 pri.
IMPORTANT INFORMATION: Do not use impact wrench/gun to torque cam gear to camshaft.Torque cam gear bolt to 22 ft lbs. Aftermarket cams are chilled cast and require a lesser torque value than the OEM/factory steel cams. If using aftermarket gears, make certain the cam gear bolt is able to engage 3 to 4 threads into the body of the cam. Thicker gears will cause the cam bolt to only engage the threads in the snout, increasing the chance of breakage.
Adv. Dur.:
312°/310°
220°/220°
216°/218°
Dur @ .050:
255°/248°
200°/198°
198°/196°
Lift (in):
.470"/.469"
.325"/.308"
.280"/.264"
Lift (mm):
11.94/11.91
8.25/7.82
7.11/6.70
Kit #: BC0030 or BC0030S
Hot street/strip or road race specification. Use with CAI, H, E, ECU, A/F mods. Excellent street manners. Requires kit BC0030.
The Honda H engine was Honda's high-performance "big block" engine family from the 1990s and early 2000s. It is largely derived from the Honda F engine and shares many design features. It was replaced by the Honda K engine. The primary applications of the H engine series were the fourth- and fifth-generation Honda Prelude, and the fifth- and sixth-generation Honda Accord. It has also enjoyed some success as a racing engine, forming the basis of Honda's Touring car racing engines for many years, and being installed in lightweight chassis (such as the Honda CRX) for use in drag racing. The H22A debuted in 1993 for use in the Honda Prelude VTEC as the H22A1. Versions of the H22A would be the Prelude's signature high-performance engine worldwide until the end of Prelude production in 2001. It was also used in the 1994-1997 Honda Accord SiR and 1998-2002 Honda Accord Euro-R in Japan.
Rocker Ratio: 1.55:1 mid, 1.5:1 sec, 1.45:1 pri.
IMPORTANT INFORMATION: Do not use impact wrench/gun to torque cam gear to camshaft.Torque cam gear bolt to 22 ft lbs. Aftermarket cams are chilled cast and require a lesser torque value than the OEM/factory steel cams. If using aftermarket gears, make certain the cam gear bolt is able to engage 3 to 4 threads into the body of the cam. Thicker gears will cause the cam bolt to only engage the threads in the snout, increasing the chance of breakage.
There are few companies in the modern motorsports industry as active and well-recognized as Brian Crower, Inc (people in the know just call it "BC"). The company has infused itself within the sport compact performance community, creating go-fast parts for some of the most popular engine platforms on the street or track. In fact, few companies can compare with Brian Crower's vast selection of engine components, making it the brand of choice for many performance auto enthusiasts.
Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.
Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.
Q: What do camshafts do? Why buy camshafts?
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.
Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.
Q: What do camshafts do? Why buy camshafts?
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
MOPAR MDS Front 5038785AD+Rear 5038786AD Hydraulic Lifter Yoke For 04-21 RAM 5.7
16PCS Active Fuel Management AFM DOD Valve Lifters for Chevy GM 5.3L 6.0L 6.2L
3.6L Cam Camshafts Left Right Engine Camshaft For Chrysler Dodge Ram 2011-2020
Stage 2 CAM Kit PAC 1218 Camshaft Spring For LS Sloppy GM LS 4.8 5.3 6.0 E1840P
5.7 hemi cam and lifter kit For 2009-2015 5.7L V8 Hemi Chrysler Dodge Jeep
