Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Brian Crower Stage 3 Camshafts Race
Part #: BC0162
$545.48
$507.30
For pair
For pair
Free Shipping! *to continental U.S. only
Fits On:
Dodge SRT-4
Description:
Adv. Dur.: 272°/272°
Dur @ .050: 211°/203°
Lift (in): .389"/.383"
Lift (mm): 9.88/9.73
Kit #: BC0160 or BC0159
Longer duration profile, added rpm potential. Intended for fully built engine. Tuning and ECU mods recommended. Requires kit BC0159 or BC0160.
The Dodge SRT-4 was a turbocharged compact car introduced by DaimlerChrysler's Street and Racing Technology in-house tuner group (originally known as PVO)in 2003. The SRT-4 was designed for the racing and muscle car crowd. The SRT-4 differed from a regular Neon, the model on which it was based, in many ways. From the outside, the SRT-4's unique front fascia was immediately noticeable. It also featured a large rear wing and special 17x6 in wheels. Under the hood was a turbocharged version of the Neon's 2.4 L I4 engine. This first appeared in the United States in the 2002 Chrysler PT Cruiser GT, but had been used in the Mexican-market Dodge Stratus/Chrysler Cirrus LXi sedan for a few years before this. The SRT-4 used a New Venture Gear T-850 5-speed manual transmission (pirated from the Graz-built turbodiesel minivan), equal-length half shafts, and a high-capacity Sachs performance clutch. Unfortunately these SRT-4 camshafts are not compatible with Dodge's new Caliber, which features variable valve timing.
Rocker Ratio: 1.75:1
Adv. Dur.: 272°/272°
Dur @ .050: 211°/203°
Lift (in): .389"/.383"
Lift (mm): 9.88/9.73
Kit #: BC0160 or BC0159
Longer duration profile, added rpm potential. Intended for fully built engine. Tuning and ECU mods recommended. Requires kit BC0159 or BC0160.
The Dodge SRT-4 was a turbocharged compact car introduced by DaimlerChrysler's Street and Racing Technology in-house tuner group (originally known as PVO)in 2003. The SRT-4 was designed for the racing and muscle car crowd. The SRT-4 differed from a regular Neon, the model on which it was based, in many ways. From the outside, the SRT-4's unique front fascia was immediately noticeable. It also featured a large rear wing and special 17x6 in wheels. Under the hood was a turbocharged version of the Neon's 2.4 L I4 engine. This first appeared in the United States in the 2002 Chrysler PT Cruiser GT, but had been used in the Mexican-market Dodge Stratus/Chrysler Cirrus LXi sedan for a few years before this. The SRT-4 used a New Venture Gear T-850 5-speed manual transmission (pirated from the Graz-built turbodiesel minivan), equal-length half shafts, and a high-capacity Sachs performance clutch. Unfortunately these SRT-4 camshafts are not compatible with Dodge's new Caliber, which features variable valve timing.
Rocker Ratio: 1.75:1
There are few companies in the modern motorsports industry as active and well-recognized as Brian Crower, Inc (people in the know just call it "BC"). The company has infused itself within the sport compact performance community, creating go-fast parts for some of the most popular engine platforms on the street or track. In fact, few companies can compare with Brian Crower's vast selection of engine components, making it the brand of choice for many performance auto enthusiasts.
Q: What do camshafts do? Why buy camshafts?
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.
Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.
Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.
Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.
Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
16X Lifters Hydraulic Roller 12499225 For GM LS7 LS1 - LS3 LS6 LQ4 LQ9 LY5 LY6
Camshafts + Rocker Arm Lifter Kit For 11-16 Chrysler Dodge Ram 3.6L V6 Pentastar
2 MDS Front 5038785AD 2 Rear 5038786AD Hydraulic Lifter Yoke for 04-21 DODGE RAM
MOPAR MDS Front 5038785AD+Rear 5038786AD Hydraulic Lifter Yoke For 04-21 RAM 5.7
Truck Norris Camshaft Lifters Head Gasket Kit FOR LS LS1 Chevy 4.8 5.3 6.0 6.2L
