Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Brian Crower Stage 2 Camshafts Street/Strip
Part #: BC0621
$1,018.22
$946.94
For 4
For 4
Free Shipping! *to continental U.S. only
Fits On:
Subaru EJ257 - STi
Description:
Adv. Dur.: 272°/272°
Dur @ .050: 222°/222°
Lift (in): .400"/.400"
Lift (mm): 10.16/10.16
Kit #: BC0600
Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose spec. OEM spring OK.
A series of low-volume versions with even greater power and grip were built by Subaru's in-house modifier, Subaru Tecnica International (STi). STi versions of the Impreza, which produced 280 PS (206 kW) from new, are often raced, largely unmodified, in the Group N class in various rally championships to great success. Introduced in 1994, the STi has proven to be a very popular high-performance machine in the Japanese domestic market. Introduced to the United States in 2004, the US model STi features the larger displacement 2.5L (EJ257) that features AVCS.
Bucket Diameter: 1.200"
Note: Intake camshafts are setup for AVCS operation. The above cams WILL WORK with AVCS. If running non AVCS setup is desired, you must install the four set screws (located in a plastic bag attached to the cam bag) in the front of each intake cam (dowel pin side) using a 2.5mm Allen wrench and LocTite. This will not allow oil to actuate the Active Valve Control System. These cams do not fit the 2008-up STi with dual AVCS.
Adv. Dur.: 272°/272°
Dur @ .050: 222°/222°
Lift (in): .400"/.400"
Lift (mm): 10.16/10.16
Kit #: BC0600
Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose spec. OEM spring OK.
A series of low-volume versions with even greater power and grip were built by Subaru's in-house modifier, Subaru Tecnica International (STi). STi versions of the Impreza, which produced 280 PS (206 kW) from new, are often raced, largely unmodified, in the Group N class in various rally championships to great success. Introduced in 1994, the STi has proven to be a very popular high-performance machine in the Japanese domestic market. Introduced to the United States in 2004, the US model STi features the larger displacement 2.5L (EJ257) that features AVCS.
Bucket Diameter: 1.200"
Note: Intake camshafts are setup for AVCS operation. The above cams WILL WORK with AVCS. If running non AVCS setup is desired, you must install the four set screws (located in a plastic bag attached to the cam bag) in the front of each intake cam (dowel pin side) using a 2.5mm Allen wrench and LocTite. This will not allow oil to actuate the Active Valve Control System. These cams do not fit the 2008-up STi with dual AVCS.
There are few companies in the modern motorsports industry as active and well-recognized as Brian Crower, Inc (people in the know just call it "BC"). The company has infused itself within the sport compact performance community, creating go-fast parts for some of the most popular engine platforms on the street or track. In fact, few companies can compare with Brian Crower's vast selection of engine components, making it the brand of choice for many performance auto enthusiasts.
Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.
Q: What do camshafts do? Why buy camshafts?
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.
Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.
Q: What do camshafts do? Why buy camshafts?
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.
Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
16PCS Active Fuel Management AFM DOD Valve Lifters for Chevy GM 5.3L 6.0L 6.2L
MOPAR MDS Front 5038785AD+Rear 5038786AD Hydraulic Lifter Yoke For 04-21 RAM 5.7
2 MDS Front 5038785AD 2 Rear 5038786AD Hydraulic Lifter Yoke for 04-21 DODGE RAM
Stage 2 Camshaft and Lifters Pushrods kit for GM LS 4.8L 5.3L 5.7L 6.0L Trucks
Camshafts Rocker Arm Lifters Kit For 11-16 Chrysler Dodge Ram 3.6L V6 Pentastar+
