Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Coast To Coast ProEFX Steel Roll Pan Without License Plate (Rear)
Part #: EFXRP16
$164.38
$131.50
For each
For each
Free Shipping! *to continental U.S. only
Material: Steel
Featured Videos
-
Video Description:In this episode of Andy's Auto Sport TV, we interviewed Duane Coad from Coast 2 Coast International. Here are some highlights from the video:
*He explains how their products are form-fitted, not universal.
*He explains how one of the best feature of Coast 2 Coast products is how quickly they can be installed. The majority of their parts are bolt-over products that snap over your factory equipment, which means they install in minutes!
*He talked about how all their chrome accessories come with a lifetime warranty!
*At the 5:03 mark, Duane says that Coast 2 Coast is excited to be associated with a fine company like Andy's!
Fits On:
1973-1987 Chevrolet C10 Pickup
Description:
Coast to Coast ProEFX Roll Pan (Rear Bumper) Features:
• Construction of 18 Gauge Steel
• EDP Coat Primer
• Custom Installation
• Tag Light included
• Enhances your vehicle for a true custom look
Coast to Coast ProEFX Roll Pan (Rear Bumper) Features:
• Construction of 18 Gauge Steel
• EDP Coat Primer
• Custom Installation
• Tag Light included
• Enhances your vehicle for a true custom look
Based out of Tampa, Florida, Coast to Coast International has been making quality chrome products for over two decades with one focus: to provide quality at a reasonable cost to a satisfied customer. Coast to Coast has four offices: Tampa, Florida, Quincy, Illinois, Huntington, Indiana, and Stockton, California.
In 1989, Coast to Coast started as a hubcap/wheel company based out of Tampa, but eventually moved to a large industrial warehouse in 1992 and have been pushing forward ever since.
In 1989, Coast to Coast started as a hubcap/wheel company based out of Tampa, but eventually moved to a large industrial warehouse in 1992 and have been pushing forward ever since.
Q: What is a roll pan? Why buy a roll pan?
A: A roll pan is a rear "fascia" many truck owners buy to replace that factory metal rear bumper. The roll pan gives a truck a much more custom, clean look as compared to the bulky factory metal bumper. Of course, by replacing the factory bumper with a roll pan, you lose the functionality of using the bumper as a step.
Q: How do you install a roll pan?
A: According to Wiki Answers: "You will need to take off the tailgate by first disconnecting the tailgate support cables on either side. You can usually half-open the tailgate and one side will be able to slide up and off. (See repair or owners manual for proper removal on your vehicle). Now that the tailgate is off, disconnect all wiring leading to rear bumper for license plate light, tow packages, etc. Next, remove rear bumper via the brackets attached at the frame (usually 3 or 4 bolts). This will completely remove your stock rear bumper. After completing those removal steps: With tailgate off, set roll pan into desired position making sure everything looks square to the sides and bottom. (Note: pulling or pushing of the bed corners is sometimes necessary for proper fit). Using duct tape, attach roll pan and reinstall tailgate to ensure clearance when tailgate is in operation. Adjust roll pan as necessary to obtain proper clearance and desired look. FINALLY bolt roll pan into place using supplied screws (or weld for steel roll pans if desired). Reinstall the tailgate and you are done!"
A: A roll pan is a rear "fascia" many truck owners buy to replace that factory metal rear bumper. The roll pan gives a truck a much more custom, clean look as compared to the bulky factory metal bumper. Of course, by replacing the factory bumper with a roll pan, you lose the functionality of using the bumper as a step.
Q: How do you install a roll pan?
A: According to Wiki Answers: "You will need to take off the tailgate by first disconnecting the tailgate support cables on either side. You can usually half-open the tailgate and one side will be able to slide up and off. (See repair or owners manual for proper removal on your vehicle). Now that the tailgate is off, disconnect all wiring leading to rear bumper for license plate light, tow packages, etc. Next, remove rear bumper via the brackets attached at the frame (usually 3 or 4 bolts). This will completely remove your stock rear bumper. After completing those removal steps: With tailgate off, set roll pan into desired position making sure everything looks square to the sides and bottom. (Note: pulling or pushing of the bed corners is sometimes necessary for proper fit). Using duct tape, attach roll pan and reinstall tailgate to ensure clearance when tailgate is in operation. Adjust roll pan as necessary to obtain proper clearance and desired look. FINALLY bolt roll pan into place using supplied screws (or weld for steel roll pans if desired). Reinstall the tailgate and you are done!"
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
N-Dure Roll Pans Rear for Chevy Styleside Chevrolet Colorado 2004-2010
86.5 - 97 Niss. Hard body steel Rollpan with license Plate box LED light
Lund Replacement Chrome Emblem Logo Cab Moon Sun Visor Running Boards Roll Pans
N-Dure Roll Pans Rear for F150 Truck Styleside Ford F-150 2004-2010
Rear Bumper Roll Pan w/LED License For 1999-2006 Chevy Silverado GMC Sierra 1500
