Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Duraflex MotorWerks Hood - 1 Piece
Part #: 119036
$1,098.75
$747.15
For each
For each
Featured Videos
-
Video Description:Installing an aftermarket hood can be tricky, but we walk you through it in this video.
*At 0:20, we remove our factory hood.
*At 1:00, we install our new carbon fiber hood. -
Video Description:Duraflex's brand video -- it's the good stuff!
-
Video Description:Heatshield Products keep your engine compartment safe, and can even help protect your vehicle's finish. In this video, we show you how installing a heat shield on your hood can prolong its life and new appearance.
*At 0:42, we get right to installing a Heatshield Products Lava Shield on our project Integra's hood.
*At 2:02, we show you how much cooler our hood's surface is after installing our heat shield. -
Video Description:Everything you need to know about hood pins in one video! In this video, we show you:
*At 0:19, we explain why you need hood pins with an aftermarket hood.
*At 1:30, we tell you about the different types of hood pins available.
*At 2:26, we show you the steps necessary to install a set of hood pins on our project Integra.
Fits On:
2019-2022 Nissan Altima
Description:
Extreme Dimensions has revolutionized the fiberglass market with our premium Extreme Dimensions aerodynamics. Extreme Dimensions combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Extreme Dimensions technology obtains a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Extreme Dimensions products come complete with black protective coating and high quality mesh grille. This revolutionary product allows the consumer to receive a premium fiberglass product at an affordable price.
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maxiumim flexibiiity
Increased durability and longer service life
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
Extreme Dimensions has revolutionized the fiberglass market with our premium Extreme Dimensions aerodynamics. Extreme Dimensions combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Extreme Dimensions technology obtains a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Extreme Dimensions products come complete with black protective coating and high quality mesh grille. This revolutionary product allows the consumer to receive a premium fiberglass product at an affordable price.
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maxiumim flexibiiity
Increased durability and longer service life
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
Extreme Dimensions, who makes the Duraflex line of products, is one of the elite brands that we dub a "Premium Brand" in our online catalog. To earn this distinction, a manufacturer must make products that exhibit cutting edge technology, attention to detail, and widespread popularity. Extreme Dimensions easily earns this distinction from our perspective. Extreme Dimensions, who developed the world-famous Duraflex line of products, is one of the largest aerodynamics manufacturers in the world and exhibits total professionalism in all facets of their business. If you buy an Extreme Dimensions product, you can expect a premium product.
Extreme Dimensions is the exclusive manufacturer of the Duraflex line of products. Duraflex is a new hybrid composite material that Extreme Dimensions created that offers outstanding durability. If you are looking for a high quality custom hood, look no further than Extreme Dimensions.
Extreme Dimensions is the exclusive manufacturer of the Duraflex line of products. Duraflex is a new hybrid composite material that Extreme Dimensions created that offers outstanding durability. If you are looking for a high quality custom hood, look no further than Extreme Dimensions.
Featured Videos
-
Video Description:Installing an aftermarket hood can be tricky, but we walk you through it in this video.
*At 0:20, we remove our factory hood.
*At 1:00, we install our new carbon fiber hood. -
Video Description:Duraflex's brand video -- it's the good stuff!
-
Video Description:Heatshield Products keep your engine compartment safe, and can even help protect your vehicle's finish. In this video, we show you how installing a heat shield on your hood can prolong its life and new appearance.
*At 0:42, we get right to installing a Heatshield Products Lava Shield on our project Integra's hood.
*At 2:02, we show you how much cooler our hood's surface is after installing our heat shield. -
Video Description:Everything you need to know about hood pins in one video! In this video, we show you:
*At 0:19, we explain why you need hood pins with an aftermarket hood.
*At 1:30, we tell you about the different types of hood pins available.
*At 2:26, we show you the steps necessary to install a set of hood pins on our project Integra.
Q: Do Duraflex products come painted?
A: No they don't. They come in an unpainted black gelcoat finish. It's expected that you'll get the product painted after you receive it.
Q: Why buy a fiberglass hood?
A: Fiberglass hoods are a fantastic way to customize the appearance of your car. There are several different styles available, and they all can change the look of your car instantly. These hoods should be painted to match the color of your car, and are normally lighter than your factory hood and therefore better for performance.
Q: Are hood pins required for a fiberglass or carbon fiber hood?
A: We strongly advise using hood pins on all fiberglass and carbon fiber hoods, as they provide an additional level of safety should the main latch fail or if a strong gust of wind should peel the hood skin away from its skeleton. In addition, lift-off “race weight” fiberglass hoods require hood pins on all four corners, as they do not have provisions for latches or hinges.
Q: How do you install a fiberglass hood?
A: Depending on the manufacturer, fiberglass hoods are often close to OEM fit, which means you simply unbolt your factory hood and replacing it with the custom hood.
Q: Can fiberglass hoods help your vehicle's performance at all?
A: Most fiberglass hoods are substantially lighter than the factory hood, which would decrease weight and therefore increase performance and make acceleration and braking quicker. Some fiberglass hood manufacturer's also provide optional "functional" air induction kits as an option to be purchased with the hood. The kits, when installed, direct incoming cold air that travels through the hood vent directly to your air box, thereby increasing horsepower and making the hood functional. Only a few hood manufacturers offer a the kit that makes the hood functional.
Q: The hood I'm considering buying from Andy's is vented and has openings in it that appear to expose it to rain. Should I be concerned about that? Will it be harmful to my vehicle if rain goes through those vents into my engine bay? Is there a way to protect against that from happening?
A: Adding guards could potentially defeat the purpose of a vented hood, which is to help cool your engine bay. Some customers do get creative and add their own diverters under the hood for a custom solution to the perceived problem, but you would have to figure out how to attach them and whether there's room under the hood in the first place. That being said, we have never heard of any problems running a vented hood as-is, and we've done it ourselves for many years without any issues to speak of.
Q: Do fiberglass hoods come pre-drilled for hood pins?
A: No. Since there are many different styles of hood pins available, it is up to our customers to drill the holes themselves to ensure a perfect fit.
A: No they don't. They come in an unpainted black gelcoat finish. It's expected that you'll get the product painted after you receive it.
Q: Why buy a fiberglass hood?
A: Fiberglass hoods are a fantastic way to customize the appearance of your car. There are several different styles available, and they all can change the look of your car instantly. These hoods should be painted to match the color of your car, and are normally lighter than your factory hood and therefore better for performance.
Q: Are hood pins required for a fiberglass or carbon fiber hood?
A: We strongly advise using hood pins on all fiberglass and carbon fiber hoods, as they provide an additional level of safety should the main latch fail or if a strong gust of wind should peel the hood skin away from its skeleton. In addition, lift-off “race weight” fiberglass hoods require hood pins on all four corners, as they do not have provisions for latches or hinges.
Q: How do you install a fiberglass hood?
A: Depending on the manufacturer, fiberglass hoods are often close to OEM fit, which means you simply unbolt your factory hood and replacing it with the custom hood.
Q: Can fiberglass hoods help your vehicle's performance at all?
A: Most fiberglass hoods are substantially lighter than the factory hood, which would decrease weight and therefore increase performance and make acceleration and braking quicker. Some fiberglass hood manufacturer's also provide optional "functional" air induction kits as an option to be purchased with the hood. The kits, when installed, direct incoming cold air that travels through the hood vent directly to your air box, thereby increasing horsepower and making the hood functional. Only a few hood manufacturers offer a the kit that makes the hood functional.
Q: The hood I'm considering buying from Andy's is vented and has openings in it that appear to expose it to rain. Should I be concerned about that? Will it be harmful to my vehicle if rain goes through those vents into my engine bay? Is there a way to protect against that from happening?
A: Adding guards could potentially defeat the purpose of a vented hood, which is to help cool your engine bay. Some customers do get creative and add their own diverters under the hood for a custom solution to the perceived problem, but you would have to figure out how to attach them and whether there's room under the hood in the first place. That being said, we have never heard of any problems running a vented hood as-is, and we've done it ourselves for many years without any issues to speak of.
Q: Do fiberglass hoods come pre-drilled for hood pins?
A: No. Since there are many different styles of hood pins available, it is up to our customers to drill the holes themselves to ensure a perfect fit.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
S1MS-16612-MF Scott Drake Shelby Hood, Fiberglass with Metal Frame
1927 T Fiberglass Hood
1986-2000 Jeep Cherokee XJ Rubicon FiberGlass Hood Lift Off
Fiberglass Nice Gelcoat Z28 Cowl Scoop New
Fiberglass Hood, 5/8 Inch Longer, fits 1932 Ford
