Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Flowmaster Header 409S - 4-1 One Piece - 3.00 In. Ball And Socket Flange Outlet - Pair
Part #: 814110
$1,048.00
$943.20
For each
For each
Free Shipping! *to continental U.S. only
Tube Grouping: 4-1
Finish: Stainless Steel
Fits On:
64-87 Chevrolet Chevelle small block V8 (long tube headers), 64-87 Chevrolet El Camino small block V8 (long tube headers), 67-... See more
Description:
Flowmaster's Scavenger Series Elite long tube headers are designed to replace the restrictive factory cast iron manifolds. These high quality headers are manufactured from stainless steel and are ceramic coated for maximum durability. They feature 1-5/8 In. primary tubes, 3/8 In. thick flanges and incorporate Flowmaster's popular 3 In. ball flange collector connections ensuring a leak free installation. Scavenger Series long tube headers deliver maximum performance and are suited to the enthusiast who wants the best. Like all Flowmaster products the benefits include improved throttle response, power and engine efficiency. Designed for an easy fit these headers include gaskets and necessary hardware for easy installation. Note 1, fits D-Port cylinder heads including ZZ4 crate engines. Note 2, does not fit 67-69 Camaro with A/C. Note 3, will fit most angle plug heads including factory Chevrolet bow tie heads. Note 4, requires removal or modification of locking steering columns if equipped. Note 5, installation requires new left side A/C bracket. For 1979 and later vehicles with short compressors the stock bracket can be used. Note 6, this product is legal only for off highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certified to California standards, pre-1968 domestic vehicles certified to federal standards and all pre-1968 foreign vehicles), per the application guide.
• Stainless steel construction
• Ball & socket collector connections
• Dyno tuned for maximum performance
• High temperature ceramic coated
• 0.375 thick laser cut flanges
• Premium Flowmaster quality
(For California residents) Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Flowmaster's Scavenger Series Elite long tube headers are designed to replace the restrictive factory cast iron manifolds. These high quality headers are manufactured from stainless steel and are ceramic coated for maximum durability. They feature 1-5/8 In. primary tubes, 3/8 In. thick flanges and incorporate Flowmaster's popular 3 In. ball flange collector connections ensuring a leak free installation. Scavenger Series long tube headers deliver maximum performance and are suited to the enthusiast who wants the best. Like all Flowmaster products the benefits include improved throttle response, power and engine efficiency. Designed for an easy fit these headers include gaskets and necessary hardware for easy installation. Note 1, fits D-Port cylinder heads including ZZ4 crate engines. Note 2, does not fit 67-69 Camaro with A/C. Note 3, will fit most angle plug heads including factory Chevrolet bow tie heads. Note 4, requires removal or modification of locking steering columns if equipped. Note 5, installation requires new left side A/C bracket. For 1979 and later vehicles with short compressors the stock bracket can be used. Note 6, this product is legal only for off highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certified to California standards, pre-1968 domestic vehicles certified to federal standards and all pre-1968 foreign vehicles), per the application guide.
• Stainless steel construction
• Ball & socket collector connections
• Dyno tuned for maximum performance
• High temperature ceramic coated
• 0.375 thick laser cut flanges
• Premium Flowmaster quality
(For California residents) Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Q: What are the different tubing options for headers and what is the difference between them?
A: There are two major designs for headers: the 4-2-1 design and the 4-1 design. In many cases 4-1 headers are designed for racing applications where the vehicle is being driven at or near redline. The 4-1 design maximizes top end power, whereas the 4-2-1 evenly distributes it throughout the power band. Either way, you're going to be getting more horsepower from a header.
Q: How do you install a header?
A: A header is a direct bolt-on. Simply remove the factory OEM exhaust manifold and the aftermarket header is put in its place. The header is to be attached the head of your vehicle. Remove all the bolts that hold the flanges in place and detach the factory manifold. The down pipe or exhaust pipe should be removed as well and then reattached once the header flanges are bolted back onto the head.
Q: What does a header do? Why buy a header?
A: An exhaust header is a performance product that replaces your factory exhaust manifold and improves an engine's performance by allowing air to flow more freely. The easier an engine breathes the more power it produces. Headers generally use piping with a wider diameter than factory tubing, which allows more air to pass through the exhaust system than factory. A header is one of the easiest bolt-on modifications you can make to increase horsepower, making an effective use of money if your goal is to quickly gain horsepower.
Q: How much does the material used to make the header matter?
A: There are two main materials that headers are manufactured out of: ceramic and stainless steel. Ceramic headers are less expensive, but are prone to cracking if they get to be extremely hot. Stainless steel headers are more expensive but are more durable and generally more stylish. Stainless steel headers can take any kind of heat you throw at it and not prone to cracking.
Q: For which vehicles is it necessary to buy a pair of headers? On your website are headers automatically sold in pairs for these vehicles?
A: When purchasing exhaust headers for a V-6 or V-8 engine, the header package is complete with two headers. If your vehicle is a 4-cylinder, there only a single header that is used.
A: There are two major designs for headers: the 4-2-1 design and the 4-1 design. In many cases 4-1 headers are designed for racing applications where the vehicle is being driven at or near redline. The 4-1 design maximizes top end power, whereas the 4-2-1 evenly distributes it throughout the power band. Either way, you're going to be getting more horsepower from a header.
Q: How do you install a header?
A: A header is a direct bolt-on. Simply remove the factory OEM exhaust manifold and the aftermarket header is put in its place. The header is to be attached the head of your vehicle. Remove all the bolts that hold the flanges in place and detach the factory manifold. The down pipe or exhaust pipe should be removed as well and then reattached once the header flanges are bolted back onto the head.
Q: What does a header do? Why buy a header?
A: An exhaust header is a performance product that replaces your factory exhaust manifold and improves an engine's performance by allowing air to flow more freely. The easier an engine breathes the more power it produces. Headers generally use piping with a wider diameter than factory tubing, which allows more air to pass through the exhaust system than factory. A header is one of the easiest bolt-on modifications you can make to increase horsepower, making an effective use of money if your goal is to quickly gain horsepower.
Q: How much does the material used to make the header matter?
A: There are two main materials that headers are manufactured out of: ceramic and stainless steel. Ceramic headers are less expensive, but are prone to cracking if they get to be extremely hot. Stainless steel headers are more expensive but are more durable and generally more stylish. Stainless steel headers can take any kind of heat you throw at it and not prone to cracking.
Q: For which vehicles is it necessary to buy a pair of headers? On your website are headers automatically sold in pairs for these vehicles?
A: When purchasing exhaust headers for a V-6 or V-8 engine, the header package is complete with two headers. If your vehicle is a 4-cylinder, there only a single header that is used.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Swap S10 Conversion Headers for Chevy LS1 LS2 LS3 LS6 LS9 LS Engines 6.0 5.3
Stainless Exhaust Headers for Dodge Dakota Ram 1500 2500 3500 Pickup 5.2 5.9L
For Silverado Sierra Truck 1 3/4 Long Tube Headers Y-Pipe 99-06 4.8L 5.3L 6.0L A
4PC Performance Exhaust Manifold Headers FITS BMW E46 E39 Z3 2.5L 2.8L 3.0L L6
Pair Stainless Exhaust Header Kit Manifold For Jeep Wrangler JK 3.8 V6 2007-2011
