Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Injector Dynamics 1000cc Injector Set - Pigtails
Part #: 1000.28.02.60.14.6-PT
$720.00 For 6
Free Shipping! *to continental U.S. only
Fits On:
96-99 BMW M3
Description:
ID1000, for BMW E36 M3, 14mm (purple) adapters, set of 6.
• Injector Dynamics fuel injectors are the result of batch testing large quantities of specially modified fuel injectors, and then carefully matching them to within 1%, in sets based on their dynamic flow across the pulsewidth range. The result is vastly superior cylinder to cylinder consistency, even at very low pulsewidths.
• In addition to receiving tightly matched injectors, you will be provided with dead time compensation values across the entire pressure and voltage range of the injector. This data will insure that the compensations in your ECU work properly, and your air fuel ratios will remain consistent as atmospheric or voltage conditions change.
• With pressure capability in excess of 8 bar this injector has found a home in many different applications.
• The ID1000 will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for engines. If you're unsure if these will work in your application, give us a call and we'll help you figure out what it will take
Nominal Dynamic Flow Rate - 1000cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 7.0 Bar (101.5 psi)
Fuel Compatibility - Compatible With All Known Fuels
Electrical Connector - USCAR
ID1000, for BMW E36 M3, 14mm (purple) adapters, set of 6.
• Injector Dynamics fuel injectors are the result of batch testing large quantities of specially modified fuel injectors, and then carefully matching them to within 1%, in sets based on their dynamic flow across the pulsewidth range. The result is vastly superior cylinder to cylinder consistency, even at very low pulsewidths.
• In addition to receiving tightly matched injectors, you will be provided with dead time compensation values across the entire pressure and voltage range of the injector. This data will insure that the compensations in your ECU work properly, and your air fuel ratios will remain consistent as atmospheric or voltage conditions change.
• With pressure capability in excess of 8 bar this injector has found a home in many different applications.
• The ID1000 will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for engines. If you're unsure if these will work in your application, give us a call and we'll help you figure out what it will take
Nominal Dynamic Flow Rate - 1000cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 7.0 Bar (101.5 psi)
Fuel Compatibility - Compatible With All Known Fuels
Electrical Connector - USCAR
Q: Do fuel injectors come in sets of 4?
A: Fuel injectors are sold individually, so you have to buy the number of injectors necessary for your car. Four-cylinder cars would use four injectors, and six-cylinders would use six fuel injectors, and so on.
Q: What are fuel injectors? Why buy fuel injectors?
A: Fuel injectors are the primary means of getting gasoline into the motor in non-carburated vehicles. The injectors are mounted in the intake manifold so that they spray fuel directly at the intake valves. A fuel rail supplies pressurized fuel to all of the injectors. Sometimes largers injectors are needed if you are customizing your performance set-up. For example, when running nitrous oxide, more boost, or a high revving naturally aspirated motor, larger fuel injectors are needed. Larger injectors are needed so that they can supply the engine with more fuel in order for it not to lean out.
Q: How do you install fuel injectors?
A: Fuel injectors are installed by unplugging the harness from the fuel rail and popping out the factory injectors. New o-ring seals should be installed at this time to prevent leaking with the new injectors.
A: Fuel injectors are sold individually, so you have to buy the number of injectors necessary for your car. Four-cylinder cars would use four injectors, and six-cylinders would use six fuel injectors, and so on.
Q: What are fuel injectors? Why buy fuel injectors?
A: Fuel injectors are the primary means of getting gasoline into the motor in non-carburated vehicles. The injectors are mounted in the intake manifold so that they spray fuel directly at the intake valves. A fuel rail supplies pressurized fuel to all of the injectors. Sometimes largers injectors are needed if you are customizing your performance set-up. For example, when running nitrous oxide, more boost, or a high revving naturally aspirated motor, larger fuel injectors are needed. Larger injectors are needed so that they can supply the engine with more fuel in order for it not to lean out.
Q: How do you install fuel injectors?
A: Fuel injectors are installed by unplugging the harness from the fuel rail and popping out the factory injectors. New o-ring seals should be installed at this time to prevent leaking with the new injectors.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
8Pcs OEM Fuel Injectors For 2001-2007 Chevy Silverado 4.8L 5.3L 6.0L 25317628
4 Pieces OEM DENSO Fuel Injectors For 1989-1995 Toyota Pickup 2.4L I4
8PCS Fuel Injectors For 1999-2000 GMC Chevrolet V8 4.8L 5.3L 6.0L 17113553
6PCS OEM NEW FUEL INJECTORS 12638530 CAMARO TRAVERSE GMC ACADIA CTS STS 3.6L V6
8x OEM Fuel Injectors For GMC Savana Sierra Chevrolet Silverado Express 12613411
