Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Injector Dynamics 2000cc Injector Set - Pigtails
Part #: 2000.28.05.60.14.8-PT
$1,920.00 For 8
Free Shipping! *to continental U.S. only
Fits On:
98-03 BMW E38 740i, 98-03 BMW E39 540i
Description:
ID2000, for BMW 5/7 Series, 14mm (purple) adapters, set of 8. Please note: ID2000 injectors are NOT compatible with gasolines containing MTBE ( specifically VP Q16 and VP Import )
• Injector Dynamics fuel injectors are the result of batch testing large quantities of specially modified fuel injectors, and then carefully matching them to within 1%, in sets based on their dynamic flow across the pulsewidth range. The result is vastly superior cylinder to cylinder consistency, even at very low pulsewidths.
• In addition to receiving tightly matched injectors, you will be provided with dead time compensation values across the entire pressure and voltage range of the injector. This data will insure that the compensations in your ECU work properly, and your air fuel ratios will remain consistent as atmospheric or voltage conditions change.
• Flowing in excess of 2000cc/min at 3 bar, the ID2000 will provide a smooth stoichiometric idle on small bore engines running E85, and it will do all this while maintaining strict linearity up to 95% duty cycle at 9000rpm
• With a pressure capability of 9 bar (130psi) this injector can flow as much as 3700cc/min with excellent low pulsewidth linearity, and has the broadest operating range of any injector on the market.
• Each injector includes the necessary adaptor top and electrical connector. The adaptor tops mechanically lock to the injector and also incorporate a 7 micron replaceable filter.
Nominal Flow Rate - 2225cc/min @ 3.00 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 9.0 Bar (130.5 psi)
Fuel Compatibility - Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels.
Incompatible with gasolines containing MTBE (specifically VP Q16 or VP Import), or Nitro Methane/Nitro Propane.
Electrical Connector - Denso Female
ID2000, for BMW 5/7 Series, 14mm (purple) adapters, set of 8. Please note: ID2000 injectors are NOT compatible with gasolines containing MTBE ( specifically VP Q16 and VP Import )
• Injector Dynamics fuel injectors are the result of batch testing large quantities of specially modified fuel injectors, and then carefully matching them to within 1%, in sets based on their dynamic flow across the pulsewidth range. The result is vastly superior cylinder to cylinder consistency, even at very low pulsewidths.
• In addition to receiving tightly matched injectors, you will be provided with dead time compensation values across the entire pressure and voltage range of the injector. This data will insure that the compensations in your ECU work properly, and your air fuel ratios will remain consistent as atmospheric or voltage conditions change.
• Flowing in excess of 2000cc/min at 3 bar, the ID2000 will provide a smooth stoichiometric idle on small bore engines running E85, and it will do all this while maintaining strict linearity up to 95% duty cycle at 9000rpm
• With a pressure capability of 9 bar (130psi) this injector can flow as much as 3700cc/min with excellent low pulsewidth linearity, and has the broadest operating range of any injector on the market.
• Each injector includes the necessary adaptor top and electrical connector. The adaptor tops mechanically lock to the injector and also incorporate a 7 micron replaceable filter.
Nominal Flow Rate - 2225cc/min @ 3.00 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 9.0 Bar (130.5 psi)
Fuel Compatibility - Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels.
Incompatible with gasolines containing MTBE (specifically VP Q16 or VP Import), or Nitro Methane/Nitro Propane.
Electrical Connector - Denso Female
Q: How do you install fuel injectors?
A: Fuel injectors are installed by unplugging the harness from the fuel rail and popping out the factory injectors. New o-ring seals should be installed at this time to prevent leaking with the new injectors.
Q: What are fuel injectors? Why buy fuel injectors?
A: Fuel injectors are the primary means of getting gasoline into the motor in non-carburated vehicles. The injectors are mounted in the intake manifold so that they spray fuel directly at the intake valves. A fuel rail supplies pressurized fuel to all of the injectors. Sometimes largers injectors are needed if you are customizing your performance set-up. For example, when running nitrous oxide, more boost, or a high revving naturally aspirated motor, larger fuel injectors are needed. Larger injectors are needed so that they can supply the engine with more fuel in order for it not to lean out.
Q: Do fuel injectors come in sets of 4?
A: Fuel injectors are sold individually, so you have to buy the number of injectors necessary for your car. Four-cylinder cars would use four injectors, and six-cylinders would use six fuel injectors, and so on.
A: Fuel injectors are installed by unplugging the harness from the fuel rail and popping out the factory injectors. New o-ring seals should be installed at this time to prevent leaking with the new injectors.
Q: What are fuel injectors? Why buy fuel injectors?
A: Fuel injectors are the primary means of getting gasoline into the motor in non-carburated vehicles. The injectors are mounted in the intake manifold so that they spray fuel directly at the intake valves. A fuel rail supplies pressurized fuel to all of the injectors. Sometimes largers injectors are needed if you are customizing your performance set-up. For example, when running nitrous oxide, more boost, or a high revving naturally aspirated motor, larger fuel injectors are needed. Larger injectors are needed so that they can supply the engine with more fuel in order for it not to lean out.
Q: Do fuel injectors come in sets of 4?
A: Fuel injectors are sold individually, so you have to buy the number of injectors necessary for your car. Four-cylinder cars would use four injectors, and six-cylinders would use six fuel injectors, and so on.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
8Pcs OEM Fuel Injectors For 2001-2007 Chevy Silverado 4.8L 5.3L 6.0L 25317628
OEM Denso 4 FUEL INJECTORS FOR 09-19 Toyota Camry RAV4 Highlander Venza Avalon
OEM Denso 6 Fuel Injectors for03-15 Toyota Tacoma 4Runner Tundra FJ Cruiser 4.0L
6PCS OEM NEW FUEL INJECTORS 12638530 CAMARO TRAVERSE GMC ACADIA CTS STS 3.6L V6
x6 OEM ACDelco Fuel Injectors for 2010 11 Buick Chevrolet GMC SAAB Cadillac 3.0L
