Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Injector Dynamics 725cc Injector Set - Plug And Play Adaptors
.jpg)
Part #: 725.13.07.60.14.4-PNP
$528.00 For 4
Free Shipping! *to continental U.S. only
Fits On:
91-01 Nissan 200SX 2.0L, 91-01 Nissan Sentra 2.0L
Description:
ID725, for SR20DET RWD. Top feed only. 14mm (purple) adapter tops. Denso cushion / 14mm lower o-ring. Set of 4.
• Bad driveability, poor throttle response, and poor crusing with large injectors are a thing of the past thanks to Injector Dynamics. We provide all neccessary data for aftermarket neccessary data for stand alone ecus. If you have a question about your application give us a call
• These have a droplet size comparable to a 600cc Siemens injector and way better spray pattern and atomization than any other injector on the market.
• The proper battery comp values are also provided with each set so you can set it up in your computer and have consistent a/f ratios as battery voltage fluctuates.
• The ID725 will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for even the smallest engines. This makes the ID725 ideal for emissions compliant OEM applications while offering the high flow rates required for mildly boosted motors
• Nominal Dynamic Flow Rate - 725cc/min @ 3.00 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
• Maximum Differential Fuel Pressure - 8.5 Bar (123.5 psi)
• Fuel Compatibility - Compatible With All Known Fuels
• Electrical Connector - USCAR
ID725, for SR20DET RWD. Top feed only. 14mm (purple) adapter tops. Denso cushion / 14mm lower o-ring. Set of 4.
• Bad driveability, poor throttle response, and poor crusing with large injectors are a thing of the past thanks to Injector Dynamics. We provide all neccessary data for aftermarket neccessary data for stand alone ecus. If you have a question about your application give us a call
• These have a droplet size comparable to a 600cc Siemens injector and way better spray pattern and atomization than any other injector on the market.
• The proper battery comp values are also provided with each set so you can set it up in your computer and have consistent a/f ratios as battery voltage fluctuates.
• The ID725 will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for even the smallest engines. This makes the ID725 ideal for emissions compliant OEM applications while offering the high flow rates required for mildly boosted motors
• Nominal Dynamic Flow Rate - 725cc/min @ 3.00 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
• Maximum Differential Fuel Pressure - 8.5 Bar (123.5 psi)
• Fuel Compatibility - Compatible With All Known Fuels
• Electrical Connector - USCAR
Q: Do fuel injectors come in sets of 4?
A: Fuel injectors are sold individually, so you have to buy the number of injectors necessary for your car. Four-cylinder cars would use four injectors, and six-cylinders would use six fuel injectors, and so on.
Q: How do you install fuel injectors?
A: Fuel injectors are installed by unplugging the harness from the fuel rail and popping out the factory injectors. New o-ring seals should be installed at this time to prevent leaking with the new injectors.
Q: What are fuel injectors? Why buy fuel injectors?
A: Fuel injectors are the primary means of getting gasoline into the motor in non-carburated vehicles. The injectors are mounted in the intake manifold so that they spray fuel directly at the intake valves. A fuel rail supplies pressurized fuel to all of the injectors. Sometimes largers injectors are needed if you are customizing your performance set-up. For example, when running nitrous oxide, more boost, or a high revving naturally aspirated motor, larger fuel injectors are needed. Larger injectors are needed so that they can supply the engine with more fuel in order for it not to lean out.
A: Fuel injectors are sold individually, so you have to buy the number of injectors necessary for your car. Four-cylinder cars would use four injectors, and six-cylinders would use six fuel injectors, and so on.
Q: How do you install fuel injectors?
A: Fuel injectors are installed by unplugging the harness from the fuel rail and popping out the factory injectors. New o-ring seals should be installed at this time to prevent leaking with the new injectors.
Q: What are fuel injectors? Why buy fuel injectors?
A: Fuel injectors are the primary means of getting gasoline into the motor in non-carburated vehicles. The injectors are mounted in the intake manifold so that they spray fuel directly at the intake valves. A fuel rail supplies pressurized fuel to all of the injectors. Sometimes largers injectors are needed if you are customizing your performance set-up. For example, when running nitrous oxide, more boost, or a high revving naturally aspirated motor, larger fuel injectors are needed. Larger injectors are needed so that they can supply the engine with more fuel in order for it not to lean out.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
x8 OEM ACDelco Fuel Injectors for 2014-2017 Chevrolet GMC 1500 5.3L A12668390 V8
OEM Denso Fuel Injectors Set for 1996-1998 Toyota 4Runner 3.4L V6 1997 96 97 98
OEM Denso 6 FUEL INJECTORS FOR 1989-1995 Toyota Pickup 4Runner T100 3.0L V6
OEM Denso 4 FUEL INJECTORS FOR 10-15 Toyota Prius Lexus CT200h 1.8L I4 HYBRID
OEM Denso 4 FUEL INJECTORS FOR 09-19 Toyota Corolla Matrix Pontiac Vibe Scion XD
