Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Magnecor Electrosports-80 (8mm) Ignition Cables
Part #: 6034
$191.02
$162.37
For set
For set
Free Shipping! *to continental U.S. only
Size: 8mm
Color: Blue
Fits On:
1988 Delta 88 With 3.8 "3" Engine, 6 Cylinder, 1988 Delta 98 With 3.8 "3" Engine, 6 Cylinder, 85-87 Grand Am, 6 Cylinder, 85-8... See more
Description:
Vastly superior replacement leads (wires in USA) for OE and aftermarket ignition leads using carbon conductors or resistor/connectors at lead ends, all of which reduce spark energy when deterioration develops with usage.
ELECTROSPORTS 80 IGNITION CABLE, with its updated high-tech wire-wound conductor, will properly suppress both RFI and EMI on all vehicles without reducing spark current or deteriorating with use. The new extremely flexible high-tear strength silicone insulating jacket allows leads to be fitted into original 7mm holders without damage, and provides better terminal retention than ever before.
;Leads using ELECTROSPORTS 80 IGNITION CABLE can be used on both older and newer carburetted engines as well as the most modern fuel injected engines using any electronic engine management system. Excellent suppression is also provided for 2-way radio and computer equipment. Ideal for engines using LPG or CNG and industrial applications where heat resistance and adequate suppression is important.
OVERALL LEAD ASSEMBLY
Outside Diameter of Cable.......... 8mm.
Colour............................................... Blue.
Boot/Terminal Configuration....... Various - to suit different domestic and foreign applications as well as customer special requirements.
CABLE
Construction Type......................... Silicone rubber insulator, re-inforcing braiding, high-tear strength silicone rubber outer jacket.
Insulator Material.......................... High dielectric silicone rubber.
Outer Jacket Material.................. Extreme high-tear strength silicone rubber.
Heat Resistance........................... 260o C (500o F) service temperature.
Dielectric Strength....................... 55,000 volts.
CONDUCTOR
Conductor Size............................. 2.00 mm in diameter (+/- .05)
Conductor Type............................. Magnecor Metallic Inductance SS25 RFI and EMI Suppressed.
Core................................................. Ferrimagnetic base over Kevlar and fiberglass substrate.
Windings........................................ 77 turns per cm (200 turns per inch).
Windings Material........................ Stainless steel.
Resistance..................................... 98 ohm per cm, 3K ohm per ft. +/- 10%.
Capacity.......................................... 55,000 volts, 2kVA.
TERMINALS
Spark Plug..................................... Stainless steel snap-lock 180o bendable and fixed 90o styles.
Distributor and Coil...................... Brass and stainless steel snap-lock 180o and 90o styles.
PROTECTIVE BOOTS
Spark Plug..................................... Silicone 205o C (400o F) - selection of straight, 45o and 90o styles used where applicable - special connector assemblies for some applications.
Distributor and Coil...................... EPDM or Silicone - some sets will be fitted with OE style connectors.
Vastly superior replacement leads (wires in USA) for OE and aftermarket ignition leads using carbon conductors or resistor/connectors at lead ends, all of which reduce spark energy when deterioration develops with usage.
ELECTROSPORTS 80 IGNITION CABLE, with its updated high-tech wire-wound conductor, will properly suppress both RFI and EMI on all vehicles without reducing spark current or deteriorating with use. The new extremely flexible high-tear strength silicone insulating jacket allows leads to be fitted into original 7mm holders without damage, and provides better terminal retention than ever before.
;Leads using ELECTROSPORTS 80 IGNITION CABLE can be used on both older and newer carburetted engines as well as the most modern fuel injected engines using any electronic engine management system. Excellent suppression is also provided for 2-way radio and computer equipment. Ideal for engines using LPG or CNG and industrial applications where heat resistance and adequate suppression is important.
OVERALL LEAD ASSEMBLY
Outside Diameter of Cable.......... 8mm.
Colour............................................... Blue.
Boot/Terminal Configuration....... Various - to suit different domestic and foreign applications as well as customer special requirements.
CABLE
Construction Type......................... Silicone rubber insulator, re-inforcing braiding, high-tear strength silicone rubber outer jacket.
Insulator Material.......................... High dielectric silicone rubber.
Outer Jacket Material.................. Extreme high-tear strength silicone rubber.
Heat Resistance........................... 260o C (500o F) service temperature.
Dielectric Strength....................... 55,000 volts.
CONDUCTOR
Conductor Size............................. 2.00 mm in diameter (+/- .05)
Conductor Type............................. Magnecor Metallic Inductance SS25 RFI and EMI Suppressed.
Core................................................. Ferrimagnetic base over Kevlar and fiberglass substrate.
Windings........................................ 77 turns per cm (200 turns per inch).
Windings Material........................ Stainless steel.
Resistance..................................... 98 ohm per cm, 3K ohm per ft. +/- 10%.
Capacity.......................................... 55,000 volts, 2kVA.
TERMINALS
Spark Plug..................................... Stainless steel snap-lock 180o bendable and fixed 90o styles.
Distributor and Coil...................... Brass and stainless steel snap-lock 180o and 90o styles.
PROTECTIVE BOOTS
Spark Plug..................................... Silicone 205o C (400o F) - selection of straight, 45o and 90o styles used where applicable - special connector assemblies for some applications.
Distributor and Coil...................... EPDM or Silicone - some sets will be fitted with OE style connectors.
Since 1976, Magnecor has been a manufacturer and supplier of ignition wires used for competition, street, industrial and military applications. Magnecor is able to provide a spark plug wire set and individual wires for almost every engine ever made using a variety of technically advanced long-service-life ignition cables.
Magnecor wires are not cheaply constructed generic spiral conductor ignition wires like some other ignition wire companies' are. Magnecor wires provide excellnet RFI and EMI suppression and feature a strong heat resistant jacket. The conductor inside the cable will last indefinitely unless severed.
Magnecor wires are not cheaply constructed generic spiral conductor ignition wires like some other ignition wire companies' are. Magnecor wires provide excellnet RFI and EMI suppression and feature a strong heat resistant jacket. The conductor inside the cable will last indefinitely unless severed.
Q: Are spark plug wires the same thing as ignition wires?
A: Ignition wires are another term used for spark plug wires. They are two terms that mean exactly the same thing.
Q: What are spark plug wires? Why purchase spark plug wires?
A: Factory spark plug wires deliver voltage to your spark plugs. Sport spark plug wires deliver a hotter, more powerful, and longer spark to the spark plugs, resulting in more power while reducing the chance for misfires and eliminating radio static.
Q: How do you install spark plug wires?
A: Spark plug wires take seconds to install. After removing your factory spark plug wires from the valve cover and distributor, you simply replace them with your new ones. 4-cyl motors have 4 spark plug wires; 6-cyl motors have 6 spark plug wires, and so on.
A: Ignition wires are another term used for spark plug wires. They are two terms that mean exactly the same thing.
Q: What are spark plug wires? Why purchase spark plug wires?
A: Factory spark plug wires deliver voltage to your spark plugs. Sport spark plug wires deliver a hotter, more powerful, and longer spark to the spark plugs, resulting in more power while reducing the chance for misfires and eliminating radio static.
Q: How do you install spark plug wires?
A: Spark plug wires take seconds to install. After removing your factory spark plug wires from the valve cover and distributor, you simply replace them with your new ones. 4-cyl motors have 4 spark plug wires; 6-cyl motors have 6 spark plug wires, and so on.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Genuine 8pcs Wires 48322 Spark Plugs 41962 Chevy Silverado GMC 4.8/5.3/6.0L V8
8 Pack Square Ignition Coil & Spark Plug Wire For Chevy GMC 4.8L 5.3L 6.0L 8.1L
9PCS Racing Spark Plug Wires 10.5mm For Chevy 350 SBC BBC V8 Ignition Wires Blue
Spark Plug Wire Set NGK 8034
Set of 8 758EE Spark Plug Wires for Chevy Chevrolet Silverado 1500 OEM Genuine
