Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Neuspeed P-Flo Air Intake Kit - Black
Part #: 65.10.79
$292.55 For each
Free Shipping! *to continental U.S. only
Featured Videos
-
Video Description:For California Residents: Andy's Auto Sport TV Explains Everything You Need to Know About CARB Certification
-
Video Description:Explanation of the Difference Between Cold Air Intakes and Short Ram Intakes on Andy's Auto Sport TV
-
Video Description:On this episode of Andy's Auto Sport TV, we explain all the basics about mass air flow sensors and what you need to know about them!
Fits On:
2006-2008.5 VW Passat (B6) 2.0T FSI (BPY) w/ Auto Trans
Description:
The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low speed engine performance, but becomes very restrictive when the engine is operating in the higher rpm range – where most performance drivers need it. The NEUSPEED® P-Flo allows you to uncork the intake side of your engine, drawing in a nearly unlimited supply of fresh air. Plus every P-Flo kit includes a high-performance, oiled multi-layer cotton gauze air filter that is washable and reusable. You also get a more agressive, deep throaty engine roar when you step on the gas pedal.
After months of development, NEUSPEED® has developed an intake pipe size that matches the factory Mass Air Flow (MAF) exactly. Because of this fuel trims does not affected and will not trigger any DTCs. In addition, eliminating the Original Equipment (OE) plastic MAF housing showed an increase in airflow, as no pre-screen is required to reduce turbulence when air is routed through the long piping with its smooth mandrel bends.
Notes:
• Available in black wrinkle or red wrinkle powder coat pipe option.
• As the OE engine cover is an integral part of the OE air intake box, it must be removed as part of the installation of the NEUSPEED® P-Flo kit.
• NOTE: This kit fits Passat (B6) with automatic transmission.
• For Passat (B6) with manual transmission, use part number: 65.10.97.
• CARB EXEMPT D-236-14 or CARB EXEMPT D-236-11 when used in conjuction with NEUSPEED® P-Chip Engine Management Software.
• Includes Aluminum heat shield.
• Actual parts shown in photo.
The plastic factory airbox is good at muffling intake noise and enhancing low rpm/low speed engine performance, but becomes very restrictive when the engine is operating in the higher rpm range – where most performance drivers need it. The NEUSPEED® P-Flo allows you to uncork the intake side of your engine, drawing in a nearly unlimited supply of fresh air. Plus every P-Flo kit includes a high-performance, oiled multi-layer cotton gauze air filter that is washable and reusable. You also get a more agressive, deep throaty engine roar when you step on the gas pedal.
After months of development, NEUSPEED® has developed an intake pipe size that matches the factory Mass Air Flow (MAF) exactly. Because of this fuel trims does not affected and will not trigger any DTCs. In addition, eliminating the Original Equipment (OE) plastic MAF housing showed an increase in airflow, as no pre-screen is required to reduce turbulence when air is routed through the long piping with its smooth mandrel bends.
Notes:
• Available in black wrinkle or red wrinkle powder coat pipe option.
• As the OE engine cover is an integral part of the OE air intake box, it must be removed as part of the installation of the NEUSPEED® P-Flo kit.
• NOTE: This kit fits Passat (B6) with automatic transmission.
• For Passat (B6) with manual transmission, use part number: 65.10.97.
• CARB EXEMPT D-236-14 or CARB EXEMPT D-236-11 when used in conjuction with NEUSPEED® P-Chip Engine Management Software.
• Includes Aluminum heat shield.
• Actual parts shown in photo.
- Andy's Auto Know Dictionary Term: Short Ram Intake
Bill Neumann is the founder of Neuspeed, which is headquartered in Camarillo, California. Neuspeed is an iconic company among euro tuners and import tuners since Neuspeed specifically caters their careful product design to those vehicles.
Q: What's the difference between a short ram intake and a cold air intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: How do you install a short ram intake?
A: Short ram intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the short air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
Q: What is a short ram intake? Why buy a short ram intake?
A: Short ram intakes bring more air into your car's engine, which creates more power during combustion. Short ram intakes will help with throttle response and gives your car more power, while at the same time adding a pleasing induction sound to your engine under acceleration. A short ram intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: How do you install a short ram intake?
A: Short ram intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the short air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
Q: What is a short ram intake? Why buy a short ram intake?
A: Short ram intakes bring more air into your car's engine, which creates more power during combustion. Short ram intakes will help with throttle response and gives your car more power, while at the same time adding a pleasing induction sound to your engine under acceleration. A short ram intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
2018-2022 Honda Accord (-1.5-) Short Ram Intake *custom MAF adapter*
Injen IS2100P Polished Aluminum Short Ram Cold Air Intake for 04-06 Scion xB 1.5
DC SPORTS SHORT RAM AIR INTAKE FOR 03-06 NISSAN 350Z INFINITI G35 - CARB LEGAL
2018-2022 Honda Accord 1.5 T cold air intake. Short Ram with filter black
For Honda Civic 10th Gen 1.5T 2016+ Short Ram Air Intake System + Heat Shield
