Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Skunk2 Powerbox Intake System
Part #: 343-12-0050
$397.89
$378.00
For each
For each
Free Shipping! *to continental U.S. only
Fits On:
13 Scion FRS (all), 13 Subaru BRZ (all)
Description:
Skunk2'S ColdAir Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. when compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures drastically reducing heat soak in comparison to other intakes.
For optimal power, the BRZ/FRS Cold Air Intake draws in the coldest and highest pressure air available. This is achieved by placing the Ram Air Box's inlet duct in front of the radiator where the most clean and cold air is found. the Ram Air Box is manufactured from crosslinked polymer to provide superior thermal rejection and structural strength as the air filter's housing.
Skunk2 Cold Air Intake systems for the BRZ/FRS include a Skunk2 Composite Velocity Stack which is a $50 added value. the Composite Velocity Stack utilizes race proven technology and is engineered to optimize air flow while maximizing velocity. the glass fiber nylon structure imparts high impact strength with low thermal conductivity to significantly reduce heat soak and air intake temperatures. the design also incorporates dimples on the entry surface to extend the boundary layer into the mouth. the dimples increase the effective cross sectional flow area causing higher total mass air flow compared to other velocity stacks. the Throttle Body Velocity Tube is manufactured from crosslinked polymer for thermal isolation which again reduces heat and heat soak. It also features a smooth, continuous flow velocity taper from 96mm internal diameter to 70mmm internal diameter which allows high air flow ultimately producing one of the best flowing and filtered Cold Air Intakes for the BRZ/FRS. It connects to the factory throttle body, no cutting or fabrication needed as it is a direct bolt on application.
The Skunk2 BRZ/FRS Cold Air Intake uses a massive 6.8' diameter double cone filter element which will allow for larger dust holding capacities. the cone filter is also washable which will avoid future expenses on a replacement filter. the supplied MAF Sensor Coupler is compatible with the factory MAF sensor for an easy bolt on application. This is the highest flowing BRZ/FRS intake on the market.
Skunk2'S ColdAir Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. when compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures drastically reducing heat soak in comparison to other intakes.
For optimal power, the BRZ/FRS Cold Air Intake draws in the coldest and highest pressure air available. This is achieved by placing the Ram Air Box's inlet duct in front of the radiator where the most clean and cold air is found. the Ram Air Box is manufactured from crosslinked polymer to provide superior thermal rejection and structural strength as the air filter's housing.
Skunk2 Cold Air Intake systems for the BRZ/FRS include a Skunk2 Composite Velocity Stack which is a $50 added value. the Composite Velocity Stack utilizes race proven technology and is engineered to optimize air flow while maximizing velocity. the glass fiber nylon structure imparts high impact strength with low thermal conductivity to significantly reduce heat soak and air intake temperatures. the design also incorporates dimples on the entry surface to extend the boundary layer into the mouth. the dimples increase the effective cross sectional flow area causing higher total mass air flow compared to other velocity stacks. the Throttle Body Velocity Tube is manufactured from crosslinked polymer for thermal isolation which again reduces heat and heat soak. It also features a smooth, continuous flow velocity taper from 96mm internal diameter to 70mmm internal diameter which allows high air flow ultimately producing one of the best flowing and filtered Cold Air Intakes for the BRZ/FRS. It connects to the factory throttle body, no cutting or fabrication needed as it is a direct bolt on application.
The Skunk2 BRZ/FRS Cold Air Intake uses a massive 6.8' diameter double cone filter element which will allow for larger dust holding capacities. the cone filter is also washable which will avoid future expenses on a replacement filter. the supplied MAF Sensor Coupler is compatible with the factory MAF sensor for an easy bolt on application. This is the highest flowing BRZ/FRS intake on the market.
Q: What do air intakes do? Why buy an air intake?
A: Air intakes bring more air into the engine, which creates more power during combustion. Air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. An air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: Do you have to buy an air filter if you're buying an air intake?
A: Aair intakes are usually sold with all the components needed including the filter and all adapters.
Q: How do you install an air intake?
A: Air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes. If you don't regularly work on your truck yourself, installing an air intake might be a great way to get started and get familiarized because it's perhaps the most simple bolt-on performance upgrade you can do. Alternatively, you can take it to a shop to have it installed and expect the labor cost to be low since it would be an hour or less of labor most likely.
A: Air intakes bring more air into the engine, which creates more power during combustion. Air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. An air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: Do you have to buy an air filter if you're buying an air intake?
A: Aair intakes are usually sold with all the components needed including the filter and all adapters.
Q: How do you install an air intake?
A: Air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes. If you don't regularly work on your truck yourself, installing an air intake might be a great way to get started and get familiarized because it's perhaps the most simple bolt-on performance upgrade you can do. Alternatively, you can take it to a shop to have it installed and expect the labor cost to be low since it would be an hour or less of labor most likely.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Black Cold Air Intake System Heat Shield + Filter for GMC Silverado 99-06 Chevy
For BMW F30 228i 320i 328i 420i 428i 2.0T 12-16 Cold Air Intake Pipe System Kit
84467638 Air Cleaner Intake Duct Chevrolet Silverado Tahoe GMC Sierra Yukon 5.3L
BLACK For 1996-04 S-10/Blazer/Jimmy/Sonoma 4.3L V6 Cold Air Intake + Heat Shield
Cold Air Intake System Heat Shield Fit For 99-06 GMC/Chevy V8 4.8L/5.3L Blue
