Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Voodoo13 Toe Arms Hard Green
Part #: TOHN-0700HG
$215.00
$197.80
For pair
For pair
Free Shipping! *to continental U.S. only
Fits On:
09-14 Acura TL, 09-14 Acura TSX, 08-17 Honda Accord
Description:
Voodoo13 adjustable rear toe arms for the 08+ Accord, 09-14 TL and 09-14 TSX give you the adjustability needed to get your toe back to spec after you've lowered your car. Our arms are engineered and designed for high performance street and race vehicles. They replace the soft rubber OE bushings with rigid spherical bearings for increased handling and performance, but may sacrifice noise and comfort compared to arms that use rubber bushings.
Our adjusting rod is made from 6061-T6 aluminum which ensures our arms are incredibly strong and lightweight. MIL-A-8625 Type III Hard Anodize finish is available in two colors Hard Clear and Hard OD Green. CNC stainless steel spacers are machined in house and work in conjunction with high quality made in the USA QA1 spherical rod ends.
Features:
High strength 6061-T6 aluminum adjusting rod
MIL-A-8625 Type III hard anodize finish
CNC stainless steel spacers
QA1 spherical rod ends with self-sealing and self-lubricated Nylon/PTFE injection molded race that keeps out dirt and debris
Note: Toe arm itself is good for +/-1 degree toe adjustment without our trailing and camber arm combination. If more than 1 degree of adjustment is necessary you must use all 3 pairs of arms together (toe, camber and trailing).
All of Voodoo13 products are engineered, manufactured, and assembled at our Gilbert, Arizona facility using only the best materials from US suppliers.
Voodoo13 adjustable rear toe arms for the 08+ Accord, 09-14 TL and 09-14 TSX give you the adjustability needed to get your toe back to spec after you've lowered your car. Our arms are engineered and designed for high performance street and race vehicles. They replace the soft rubber OE bushings with rigid spherical bearings for increased handling and performance, but may sacrifice noise and comfort compared to arms that use rubber bushings.
Our adjusting rod is made from 6061-T6 aluminum which ensures our arms are incredibly strong and lightweight. MIL-A-8625 Type III Hard Anodize finish is available in two colors Hard Clear and Hard OD Green. CNC stainless steel spacers are machined in house and work in conjunction with high quality made in the USA QA1 spherical rod ends.
Features:
High strength 6061-T6 aluminum adjusting rod
MIL-A-8625 Type III hard anodize finish
CNC stainless steel spacers
QA1 spherical rod ends with self-sealing and self-lubricated Nylon/PTFE injection molded race that keeps out dirt and debris
Note: Toe arm itself is good for +/-1 degree toe adjustment without our trailing and camber arm combination. If more than 1 degree of adjustment is necessary you must use all 3 pairs of arms together (toe, camber and trailing).
All of Voodoo13 products are engineered, manufactured, and assembled at our Gilbert, Arizona facility using only the best materials from US suppliers.
Q: What do camber kits do? Why buy camber kits?
A: Any amount of ride height change will cause the camber of your tires to change. This means that instead of the tires being perfectly perpendicular to the grant, they will be slight slanted, inward in the case of negative camber, outward in the case of positive camber. It might not always be visible, but having your camber out of adjustment will cause the tire to run on the inside or outside edge only since the tires will be slanted relative to the ground. The lower you go the more negative camber you will get and the faster the tire will wear. There are different camber kits available to combat this problem; the correct kit is determined by how much your camber is away from the factory recommended specification.
Q: How do you install camber kits?
A: Depending on the car you drive, camber kits are comprised differently. Contact us for installation details, or simply have it installed by professionals.
Q: Do camber kits come in sets of 4?
A: No, unless otherwise noted, camber kits are sold in sets of 2, so you buy one set for the front and/or one set for the rear.
A: Any amount of ride height change will cause the camber of your tires to change. This means that instead of the tires being perfectly perpendicular to the grant, they will be slight slanted, inward in the case of negative camber, outward in the case of positive camber. It might not always be visible, but having your camber out of adjustment will cause the tire to run on the inside or outside edge only since the tires will be slanted relative to the ground. The lower you go the more negative camber you will get and the faster the tire will wear. There are different camber kits available to combat this problem; the correct kit is determined by how much your camber is away from the factory recommended specification.
Q: How do you install camber kits?
A: Depending on the car you drive, camber kits are comprised differently. Contact us for installation details, or simply have it installed by professionals.
Q: Do camber kits come in sets of 4?
A: No, unless otherwise noted, camber kits are sold in sets of 2, so you buy one set for the front and/or one set for the rear.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Front Adjustable Alignment Camber Caster Cam Bolt Kit for 1997-2003 F150 2WD 4X4
Extreme Camber Caster Alignment Bushing Set Pair 1980-1996 F150 Bronco 4x4 USA
Extreme Alignment Camber Caster Bushings Pair Ford 1987-2024 2WD Trucks MADE USA
LYKT 2pcs Arms Alignment Rear Camber Kit for Nissan 13-18 Altima、16-20 Maxima
LYKT 2pcs Adjustable Arms Alignment Rear Camber Kit for Benz C、CLK、E、SL、SLK
