Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Glowshift Triple Pillar Pod (Gray)
Part #: GS-317G
$67.20 For each
Free Shipping! *to continental U.S. only
Featured Videos
-
Video Description:In this video, we tell you about the gauges that we installed in our project Integra. Highlights include:
*At 0:59, we talk about the specific gauges we chose and why.
*At 1:46, we talk about gauge accessories, such as sandwich adapters for oil lines.
*At 2:36, we begin our gauges installation.
*At 3:25, we install some gauges in our GlowShift gauge bezel.
*At 6:12, we show you how we installed our boost vacuum gauge's sending unit under the hood.
*At 7:12, we install our oil filter sandwich adapter so that we can get an accurate oil pressure and temperature reading.
*At 10:10, we install our water temperature sending unit.
*At 15:20, we show you the results of our efforts - a slew of new performance gauges! -
Video Description:In this video, we go over the ins and outs of aftermarket gauges. Highlights include:
*At 0:38, we explain why aftermarket gauges are usually more accurate, and therefore more useful, than factory gauges.
*At 0:48, we talk about air/fuel ratio gauges.
*At 2:14, we talk about boost gauges.
*At 2:30, we tell you about boost vacuum gauges.
*At 2:42, we go over fuel pressure gauges.
*At 2:56, we talk about oil pressure gauges.
*At 3:07, we talkabout oil temperature gauges.
*At 3:28, we tell you about water temperature gauges.
*At 3:40, we talk about tachometers.
*At 4:02, we talk about voltmeters and amp gauges.
*At 4:28, we go over exhaust gas temperature gauges.
*At 4:44, we offer our opinion of the most critical gauges to get for your vehicle.
*At 5:08, we tell you about the different types, styles and sizes of gauges available, including mechanical, electric, analog, and digital. -
Video Description:In this video, we show you a typical installation of aftermarket gauges into a diesel truck. Highlights include:
*At 0:36, we tell you which gauges we chose for our installation, and why.
*At 2:22, we get started with the installation of our gauges, beginning with our exhaust gas temperature gauge sending unit.
*At 3:53, we begin the installation of our transmission temperature gauge sending unit.
*At 4:55, we install our boost gauge sending unit
*At 6:50, we run our sending unit wires inside the cab of the truck so that we can hook up our gauges.
*At 8:50, we show you how to tie your gauge wiring into your fuse block.
At 12:45, we install our GlowShift gauge pod.
*At 14:00, we finally hook up the gauges themselves.
*At 14:42, we turn on our new gauges for the first time! -
Video Description:So why do you need a transmission temperature gauge? Watch this video to find out! Highlights include:
*At 0:15, we explain the different situations in which you may need a trans temp gauge.
Fits On:
04-06 Mazda 3
Description:
This Gray Triple Gauge A-Pillar Pod is an aftermarket gauge pod that is color matched and specifically designed for your 04-08 Mazda 3, allowing you to mount three 2 1/16th inch (52mm) gauges for a completely custom look. This Mazda 3 triple A-pillar pod is manufactured from high quality ABS plastic that allows it to withstand cracking, fading, and warping, and is mounted to your factory A-pillar with the included screws. GlowShift includes mounting hardware, installation instructions, and a one year limited warranty with every A-pillar pod purchase.
• Gray Triple A-Pillar Gauge Pod Designed to Fit 04-08 Mazda 3
• Mounts Three 2 1/16th (52mm) Gauges
• Manufactured from ABS Plastic
• Color Matched to 04-08 Mazda 3
• Installation Instructions
• Mounting Hardware
• Lifetime Technical Support
• 1 Year Limited Warranty
This Gray Triple Gauge A-Pillar Pod is an aftermarket gauge pod that is color matched and specifically designed for your 04-08 Mazda 3, allowing you to mount three 2 1/16th inch (52mm) gauges for a completely custom look. This Mazda 3 triple A-pillar pod is manufactured from high quality ABS plastic that allows it to withstand cracking, fading, and warping, and is mounted to your factory A-pillar with the included screws. GlowShift includes mounting hardware, installation instructions, and a one year limited warranty with every A-pillar pod purchase.
• Gray Triple A-Pillar Gauge Pod Designed to Fit 04-08 Mazda 3
• Mounts Three 2 1/16th (52mm) Gauges
• Manufactured from ABS Plastic
• Color Matched to 04-08 Mazda 3
• Installation Instructions
• Mounting Hardware
• Lifetime Technical Support
• 1 Year Limited Warranty
Glowshift is a company that manufactures a gauges for any automotive application. Whether you're looking for boost gauge, speedometer, oil pressure gauge or practically anything else, Glowshift carries one for you. Their gauges come in a variety of colors and styles.
Glowshift supplies all necessary mounting equipment, sensor adaptors and general accessories that one would need to mount a gauge. For you're someone looking to better monitor their car's functions, add some interior flash, or both, Glowshift carries the right kind of products for you.
Glowshift supplies all necessary mounting equipment, sensor adaptors and general accessories that one would need to mount a gauge. For you're someone looking to better monitor their car's functions, add some interior flash, or both, Glowshift carries the right kind of products for you.
Featured Videos
-
Video Description:In this video, we tell you about the gauges that we installed in our project Integra. Highlights include:
*At 0:59, we talk about the specific gauges we chose and why.
*At 1:46, we talk about gauge accessories, such as sandwich adapters for oil lines.
*At 2:36, we begin our gauges installation.
*At 3:25, we install some gauges in our GlowShift gauge bezel.
*At 6:12, we show you how we installed our boost vacuum gauge's sending unit under the hood.
*At 7:12, we install our oil filter sandwich adapter so that we can get an accurate oil pressure and temperature reading.
*At 10:10, we install our water temperature sending unit.
*At 15:20, we show you the results of our efforts - a slew of new performance gauges! -
Video Description:In this video, we go over the ins and outs of aftermarket gauges. Highlights include:
*At 0:38, we explain why aftermarket gauges are usually more accurate, and therefore more useful, than factory gauges.
*At 0:48, we talk about air/fuel ratio gauges.
*At 2:14, we talk about boost gauges.
*At 2:30, we tell you about boost vacuum gauges.
*At 2:42, we go over fuel pressure gauges.
*At 2:56, we talk about oil pressure gauges.
*At 3:07, we talkabout oil temperature gauges.
*At 3:28, we tell you about water temperature gauges.
*At 3:40, we talk about tachometers.
*At 4:02, we talk about voltmeters and amp gauges.
*At 4:28, we go over exhaust gas temperature gauges.
*At 4:44, we offer our opinion of the most critical gauges to get for your vehicle.
*At 5:08, we tell you about the different types, styles and sizes of gauges available, including mechanical, electric, analog, and digital. -
Video Description:In this video, we show you a typical installation of aftermarket gauges into a diesel truck. Highlights include:
*At 0:36, we tell you which gauges we chose for our installation, and why.
*At 2:22, we get started with the installation of our gauges, beginning with our exhaust gas temperature gauge sending unit.
*At 3:53, we begin the installation of our transmission temperature gauge sending unit.
*At 4:55, we install our boost gauge sending unit
*At 6:50, we run our sending unit wires inside the cab of the truck so that we can hook up our gauges.
*At 8:50, we show you how to tie your gauge wiring into your fuse block.
At 12:45, we install our GlowShift gauge pod.
*At 14:00, we finally hook up the gauges themselves.
*At 14:42, we turn on our new gauges for the first time! -
Video Description:So why do you need a transmission temperature gauge? Watch this video to find out! Highlights include:
*At 0:15, we explain the different situations in which you may need a trans temp gauge.
Q: What is a gauge pod? Why buy a gauge pod?
A: A gauge pod is an alternative method of housing your gauges if there is a lack of room in your vehicle or you're just looking for the sporty look.
Q: How do you install a gauge pod?
A: Gauge pods include hardware and usually attach to the a-pillar post of your vehicle; sometimes gauge pods are mounted onto flat surfaces as well and attach using the included hardware, depending on the style of the gauge pod. Normal hand tools are required and installation can be completed in minutes.
Q: Will this gauge pod fit my right hand drive vehicle?
A: Most universal gauge pods will work since they are designed to fit a multitude of configurations. However, items like vehicle-specific pillar pods will be shaped to fit left-hand drive vehicles, unless otherwise denoted.
A: A gauge pod is an alternative method of housing your gauges if there is a lack of room in your vehicle or you're just looking for the sporty look.
Q: How do you install a gauge pod?
A: Gauge pods include hardware and usually attach to the a-pillar post of your vehicle; sometimes gauge pods are mounted onto flat surfaces as well and attach using the included hardware, depending on the style of the gauge pod. Normal hand tools are required and installation can be completed in minutes.
Q: Will this gauge pod fit my right hand drive vehicle?
A: Most universal gauge pods will work since they are designed to fit a multitude of configurations. However, items like vehicle-specific pillar pods will be shaped to fit left-hand drive vehicles, unless otherwise denoted.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Universal 52mm 2" Single Gauge Pod Dash / Pillar Mount Holder Meter Beige-Tan
Universal 52mm 2" Dual Gauge Pod Dash / Pillar Mount Holder Meter Beige-Tan
Lexus IS300 Triple Gauge Pod Holder 52mm - 3D Printed with the correct material
52mm Universal GlowShift Gauges Dual Pillar Pod Mount
Universal 52mm 2" Dual Gauge Pod Dash Mount Holder Meter
