EXTERIOR
INTERIOR
LIGHTS
PERFORMANCE
SUSPENSION
BRAKES
DRIVETRAIN
WHEELS
 Select Your Vehicle

 Select Your Vehicle

Glowshift Red Digital Trans Temperature Gauge


10% off Glowshift Gauges
Glowshift Red Digital Trans Temperature Gauge
 

Part #: GS-RD12


$82.01 For each
Free Shipping! *to continental U.S. only

Andy's Auto Sport, Auto Parts & Supplies  New, Monterey, CA


Lettering Color: Red
Face Color: Black
Gauge Type: Transmission Temperature


Glowshift Red Digital Trans Temperature Gauge
 







Product Details
Featured Videos


Fits On:
All Cars (Universal), All Jeeps (Universal), All Muscle Cars (Universal), All SUVs (Universal), All Trucks (Universal), All Va... See more

Description:
GlowShift's Red Digital Series Transmission Temperature Gauge is crucial for any vehicle with an automatic transmission, especially diesel trucks that are towing heavy loads over long distances. GlowShift's 2 1/16th Inch (52mm) Red Digital Transmission Temperature Gauge reads from 68 to 302 degrees Fahrenheit allowing you to closely monitor your transmission's temperature, ensuring that is does not overheat and cause critical damage. This digital transmission temperature gauge boasts ultra-high performance features that include an easy to read red LED digital readout, a self-calibration mode at startup, an ultra-thin design, as well as a low profile tinted lens. The included red digital LED readout allows you to easily view all gauge readings regardless of the angle or lighting conditions. Included with this digital trans temp gauge is a 1/8th NPT electronic temperature sensor that reads from 68 to 302 degrees Fahrenheit, and can be installed directly into your vehicle's transmission test port or use it can be used to replace your stock sensor. For easier night driving, GlowShift's Red Digital Transmission Temperature Gauge's LED display will dim 30% when connected to a positive 12 volt headlight source. GlowShift stands behind all of its products by including free lifetime technical support and a one year limited warranty with every gauge purchase.

• 2 1/16 Inch (52mm) Black Face Gauge with a Low Profile Tinted Lens
• Transmission Temperature Reading from 68 to 302 Degrees Fahrenheit
• Self-Calibration Mode at Startup
• Ultra-Thin Design – Gauge is Only 1 Inch in Depth
• Electronic Transmission Temperature Sensor with 1/8th NPT Threads
• Dimmer Wire Allows the Gauge to Dim 30%
• Mounting Hardware
• Installation Instructions
• Free Lifetime Technical Support
• One Year Limited Warranty
Helpful Resources
About Glowshift
Glowshift is a company that manufactures a gauges for any automotive application. Whether you're looking for boost gauge, speedometer, oil pressure gauge or practically anything else, Glowshift carries one for you. Their gauges come in a variety of colors and styles.

Glowshift supplies all necessary mounting equipment, sensor adaptors and general accessories that one would need to mount a gauge. For you're someone looking to better monitor their car's functions, add some interior flash, or both, Glowshift carries the right kind of products for you.
Featured Videos


FAQs
Q: What are the different types of gauges available?
A: There are dozens of gauges available which monitor all types of engine performance. Some common ones are air/fuel ratio, oil pressure, oil temperature, coolant temperature, exhaust temperature, fuel pressure and nitrous pressure gauges. Several more are available, so check our product pages to get more details.

Q: Why buy gauges?
A: Gauges can give you the warm feeling of knowing that your engine is healthy and warn you when it isn't. The main gauges that help you monitor the health of any high-performance engine would be the basic gauges, such oil pressure, oil temperature and coolant temperature. Aside from that, they give your car that custom race look.

Q: How do I install a tach in a car that did not come with one? How difficult is it?
A: A tachometer is a great instrument to have in your car. Monitoring your engines RPM will help you shift at the appropriate time to gain the best performance or even better gas mileage. Most aftermarket tachometers only have 3 or 4 wires that need to be connected for operation. A main power wire that gets connected to a 12 volt ignition source, a ground wire, a tach signal wire that connects to the coil or the designated signal wire in your cars wiring diagram, and sometimes a wire to run the light inside the tach for night time use, which can be connected to the same power source as your other dash lights. If your car did not come with a tach, but it was an option for your specific model then there is a good chance the wiring is already in place to run the tachometer. It is best to purchase a factory service manual and carefully study the wiring schematics to determine if the wiring is there or not. The only tools you will need for this wiring job are a pair of wire cutters, a pair of wire strippers, a good pair of wire crimpers, some crimp-on style electrical connectors and a little electrical tape. While this is a pretty simple job, if you are not comfortable using these tools it is best to seek professional help.

If you are trying to install a late model gauge cluster, including a tach, into an older model car that did not have one the process is a little more complicated. You will need the wiring diagrams for both the donor vehicle and the car you are installing the gauge cluster in. You will then have to carefully trace and mark each wire to determine what it is for. Finally you connect the appropriate wires together (temp gauge to temp sender wire etc.) and carefully tape off any wires that are unused. Because modern cars use have varied computer controlled components it is not always possible or compatible to swap gauge clusters so it is important to research the subject for your specific model before taking the plunge.

Q: Do gauges work on any vehicle?
A: Gauges are universal and can be mounted virtually anywhere in any vehicle. Gauge pods are usually used to house these aftermarket gauges within your vehicle.

Q: How do you install gauges?
A: Some gauges are electrical while some are mechanical. Electrical gauges use sensors that have to be installed, while mechanical gauges rely on hoses for feedback. All gauges must be wired up for lighting within your vehicle.

If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.



Have a question about this product? Click here to email us!


Andy's Auto Sport, Auto Parts & Supplies  New, Monterey, CA




When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Not able to find what you are looking for?

1973-1987 Chevy Truck Digital Dash Panel Blue LED Gauges Lifetime Warranty

1978-1988 Monte Carlo Digital Dash Panel White LED Gauges Lifetime Warranty

GENUINE AEM 30-0300 X-Series Wideband Gauge AFR O2 Air Fuel Ratio 2 1/16" 52MM

1992-1994 Chevy Truck Digital Dash Panel Cluster Gauges Blue LEDs

1973-1987 Chevy Truck Digital Dash Panel Red LED Gauges By Intellitronix DP6004R






Popular Categories
Exhaust Systems
Cold Air Intakes
Headlights
Tail Lights
Body Kits
Hoods
Struts and Shocks
Racing Seats
Interior Sitemap