Helix Stock Height Spindle

Q: What exactly is a spindle?
A: According to DJM Suspension: "While control arms might be considered the horizontal members of the front end, spindles would be the vertical member that ties the control arms together. Both upper and lower control arms attach themselves through ball joints to the spindle. This is a cast iron part where the machined or steering knuckle is located. The wheel bearings and brake rotors are mounted to the axle, and the spindle also locates the brake caliper and tie rod end (steering). Steering knuckles are found on some late model trucks. They do exactly the same thing as a traditional spindle only there is no axle mounted in them. A hub center which has wheel bearings and wheel mounting hubs integrated together just bolts into the knuckle."

Q: Will drop spindles affect the camber of my tires? Will I need to re-align them?
A: No, one of the beauties of using drop spindles to lower your truck is that they maintain the camber of the wheels since the interact with the control arms the same as the factory spindle does. The only drawback to spindles is that there is only so far you can lower your truck with drop spindles alone. So if you are happy with a moderate drop, then drop spindles are probably the best possible option overall. If you want to get more drop than the drop spindle alone offers, you can add a dropped coil spring to the mix. It accomplishes the purpose of additional lowering, but you lose suspension travel (which reduces ride quality). Lowered coils also have a higher spring rate, (which reduces ride quality) and you usually need to replace your shock absorber with a shorter one (this could reduce ride quality). And all of this costs more. A spindle and spring combination will lower your truck a long way, but pay attention to wheel clearance, alignment, and watch your ride quality. At some point the loss of suspension travel might get too you.

Q: Why buy a spindle?
A: We sell spindles that lower your truck. Dropped spindles are simply spindle castings where the axle (or hub center) is moved up away from the lower ball joint. This lowers your truck by moving your wheel up in the fender well. There is a limit to how far you can move the axle up (you run out of casting), which is why you see most spindle applications drop about 2 inches.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.